HP Color Laserjet 2605 error code

HP Color Laserjet 2605 error code description

10.000x Supply error - E-label cannot be read or print cartridge is

not properly installed.

50.1 Fuser Error - low temperature

50.2 Fuser Error - high temperature

50.3 Fuser Error - slow temperature

51.20/1/2/3 Error - Scanner Error

55.1 Error - Error DC controller error. The device has

experienced an internal hardware error

57 Fan Error - The device has experienced a problem with

its internal fan.

HP laserjet m1522nf known issue

HP Laserjet m1522nf fax issuse in Malaysia.

Problem:Transmitting Send or receive fax print out blank sometimes.
Error message : Fax error 441

Method to solve : try disabling the V.34 protocol. To do this, go to the device control panel and select Menu, and then Fax Setup, All Faxes, V.34, and Off.
This is a common problem for the the m1522nf.

Hp Laserjet3550 printer 59.99.00 error

Model: HP Color Laserjet 3550 Printer
problem error: 59.99.00 , paper cannot pick-up at tray 1.

possible problems:
59.99.00 An error occurred in the secondary transfer engaging mechanism.

1. Faulty secondary transfer engagement sensor. Replace the secondary transfer engagement sensor.

2. Faulty secondary transfer engaging solenoid. Replace the secondary transfer engaging solenoid.

3. Faulty feed motor. Replace the feed motor.

4. Faulty DC controller PCB
Action: Replace the DC controller PCB.

samsung ML-2150 gear broken picture

Model: samsung ML-215
Description:samsung ML-2150 gear broken picture
Customer complaint : gear noisy sound

reason of gear broken (unknown)



The noisy sound come from here



exact location of the gear

How to fix paper jam?

I'm here to teach how to remove paper jam.
This technic can applies to laser printer and laser fax machine.

Firstly, dont get nervous.
Follow my step:

Step 1 : Turn Off printer
Step 2 : Inspect the printer.
Step 3 : take out paper tray
Step 4 : Open toner door cover
Step 5 : take out toner from the printer/fax.
Step 6: Inspect the paper jam path

Step 7 a: If the paper jam at the pick-up assembly part,use your both hands pull out the paper(this step should be careful, DONT NOT TEAR OFF THE PAPER!!).If you unable to pull it you may need to manually rotate the roller and gear that feed the paper through the printer.

Step 7 b: If the paper jam at the Exit fusser assembly, u need to wait after the fusser cold down.approximately 10mins, open the fusser assembly door, use both hands to pull out, same as step 7a, do not tear off any part of the paper, if will difficult to take the small piece of paper that stuck inside.

Step 8:Turn the printer back on. If you continue to receive a printer jam error. There maybe something wrong in your printer.you need to contact technician help you onsite troubleshoot it.


* The cause of paper jam sometime is user does not install the paper properly or the paper is worn out.

Most of malaysia companies(including me) like using recycled-content paper, please becareful to check your paper, do not have any staple pin/clip staple on it.